Raymarine SmartPilot X-10 Hydraulic Autopilot System Pack
An all-in-one-box autopilot solution perfect for small fishing and cruising powerboats with hydraulic steering.

ST70 Control Head Features:

• The system features the ST70 color autopilot controller.
• ST70 color 3.5" sunlight viewable display
• High resolution, 3.5" TFT LCD display with 320 x 240 pixels
• Intuitive menu and icon driven interface
• Simple pushbutton controls make operation simple and straightforward
• High-visibility numerical readouts
• Day/night color palettes.
• Simple setup and calibration with AutoLearn
• Programmable AutoTack control
• Extensive range of fishing patterns
• Multifunctional dodge feature
• SeaTalkng next generation data bus interface for creating a ST70 instrument network
• NMEA2000 compatible
• Compatible with Raymarine SeaTalk and SeaTalkng autopilots as well as Raymarine multifunction displays

X-10 Autopilot Core Pack Features:

• Designed for all Raymarine Type 1 autopilot drives.
• Built-in rate gyro processor
• Raymarine AST (Advanced Steering Technology) Software
• AutoLearn calibration.
• Smart Rudder Sense technology eliminates the need for a rudder feedback sensor.
• NMEA 0183 and NMEA 2000 compatible.
• SeaTalk and SeaTalkng compatible.
• Automatic trolling of preset fishing patterns

Type 1 Hydraulic Drive Features

• Smooth, reliable integration with boat's hydraulic steering system.
• Compatible with hydraulic steering systems 4.9 to 14 cubic inches 80-230cc).

ST70 Autopilot Control Head Specifications:

• Display Type Sunlight viewable Color Transflective TFT
• Display Size 3.5"
• Resolution QVGA (320 x 240 pixels)
• Interfaces SeaTalkng, NMEA2000, SeaTalk, SeaTalk2
• Connectors 2 SeaTalkng connectors
• Dimensions (W x H X D) 4.3" (110mm) x 4.5" (115mm) x 0.95" (24mm)
• Weight 0.6 lbs (.27 kg)
• Mounting Low profile flush or surface mount
• Voltage 9-16 Volts DC
• Current Draw 220mA
• Operating temperature range 14°F to +144°F (-10° C to +50° C)
• Storage temperature range 4°F to +158°F (-20° C to +70° C)
• Humidity Up to 95%
• Waterproofing standard IPX6
  

Type 1 Hydraulic Drive Specifications:

• Ram Capacity 4.9-14 cubic inches (80-230 cc)
• Maximum Stall Pressure 750 PSI (50 bar) At 12V DC.
• Peak flow rate (no load) 67 cubic inches per minute (1000 cc/min.)

X-10 Autopilot Core Pack Specification:

• EMC compliance Europe 2004/108/EC (EMC) Australia and New Zealand: C-Tick, Compliance Level 2
• Inputs Fluxgate compass, NMEA 0183 v2.3, SeaTalk, SeaTalkng, power, sleep switch and rudder position sensor
• Steering drive compatibility All Type 1 drives/pumps (excluding CR pumps) (drive voltage must match boats supply voltage)
• Drive motor output continuous 10A at supply voltage
• Drive clutch output 1.2A at 12 / 24 V selectable
• SeaTalk output 2A at 12 V (fuse protected at 2A)
• SeaTalkng output 2A at 12 V (fuse protected at 2A)
• NMEA 0183 v2.3 inputs/outputs See relevant installation guide for received/transmitted NMEA 0183
• NMEA fast heading output HDG 10 Hz 0.1° resolution
• Fuses Standard automotive blade fuses
• Power Terminals 15A
• SeaTalk Terminals 2A
• Operating temperature -10°C to 55°C (14°F to 131°F)
• Non-operating temperature -20°C to 70°C (-4°F to 158°F)
• Relative humidity limit 80%
• Water protection drip resistant when mounted vertically
• Gyro internal GyroPlus fitted onto circuit board as standard
• Dimensions (width, height, depth)307mm (12.1 in), 195 mm (7.7 in), 70 mm (2.8 in)
• Nominal supply voltage 12 or 24 V DC (fuse protected at 15A)
• Operating voltage range 10 V to 32 V DC
• Power consumption (standby) 300 mA
• temperature range -5°C to 50°C (23°F to 122°F)